GEARBOX 2 is a unique new fin box design with some features not found in other fin systems.
Here are some of the key takeaway features.
An unprecedented amount of innovation is currently occurring with fins and fin systems. Ranging from the simple to complex, tool-less fin attachment, to a wide range of other options.
Our choice was to go back to basics, with a system that is light, strong, while at the same time simple to install and easy to use. A design optimized for under the glass installation. The goal was to deliver a system that was both simple and familiar for builders to install, and surfers to use.
GEARBOX 2, is as light as possible without compromising the strength. The unique patent pending design, delivers unprecedented strength for an under the glass system.
Current under the glass systems rely on the bond between the laminating resin and a plastic flange that surrounds the box. This is less than optimal! GEARBOX 2 turns the flange concept on its head by placing the web of the flange lower down on the box, creating a load beam collar. This collar creates a flange shaped to form a cup on it's upper surface, a cover is then placed within this cup.
We select a cover material that provides optimal bonding to the resin system. The entire exposed upper surface of the cover allows the bottom laminate of the surfboard an optimal bonding area. The outer flange of the load beam encapsulates the cover. More important is the unique aesthetic created once installed in a board. Creates the appearance of a pin line around the outer perimeter of the box.
By separating the cover from the collar, optimization for superior bonding becomes possible! Along with a number of aesthetic considerations.
The trussed load beam collar, saves weight while facilitating the dissipation of side loads. Additionally, the trussing allows the exposure of the cover bottom through the trusses. This exposed cover bonds with the underlying surfboard foam during installation improving the strength.
The result is a design, optimized with materials that provide good bonding strength! The standard cover is an expanded ABS material, sanded to enhance the bond with the surfboard resin system.
The high density expanded ABS utilized in the cover being stiff, imparts additional rigidity to the collar!
The patent pending load beam collar features a cover that can be customized in a wide variety of ways to enhance the appearance of the surfboard. While still providing a superior bond to the resin system! No other fin systems offers this level of customization!
The design of the collar does not restrict the cover material, anything providing a good bonding surface is fine. For example, in a balsa wood board the cover could be balsa so that the box blends in with the surrounding wood. The design of the cover supports the application of inlays or overlays to its upper surface. Facilitating different appearances for the installation of the box.
While a wide array of stylistic uses exist for the cover, the primary criteria is good bonding with the resin system. Covers are also available in a range of primary colors to provide further customization options!
The cover is also where the cant color coding dot is located. It is positioned on the outboard edge of the cover where it is easily visible at all times!
GEARBOX 2 employs a familiar screw placement, located on the inner side of the box, generating a locking force on the fin base. The fin bases have recesses onto which the screws land to help force the base into the slot. Center boxes have opposing screws. A bridge in the center of the slot ties the two sides of the slot together to resist the lateral forces on the box.
To assist in the fine tuning of a board, the slot features 5mm (3/16") of movement forward and backward. Not only does this help when installing a fin, but it also facilitates control over the performance of the fins.
The box's slot is compatible with dual tab fins, and with our own full length base.
The two step install process creates a cavity with a shelf onto which the load beam collar rests. Providing better bonding to the surfboard foam. The complete routing system makes the installation process simple. The routing system also supports a single routing option if one of our HD foam support blocks are utilized. These blocks are sold separately and have been machined for a precise fit in the routed cavity. Additionally, they come with the bottom cavity already machined into the block.
This interactive image allows exploration of the features of the box.
GEARBOX is a strong, light, simple, easy to install, and customizable fin box. Designed to meet all of the key requirements for a fin system, while keeping things simple. Extensive testing and thinking has gone into the design in order to strip the system down to the bare essentials.
The GEARBOX 2 fin system consists of six (6) different boxes. Five (5) side boxes, featuring different cant angles, and a dedicated center box. Load beam collar cover. Designed for placement underneath the glass during the lamination process.
A unique patent pending load beam collar with cover, turns the entire top surface of the cover into a bonding surface. Truss openings in the load beam collar lighten the weight without sacrificing strength. Outline shape of the beam improves roll strength of the system once installed. Features a wide mid-section providing largest possible footprint, without impeding close to rail installation.
The design of the collar does not restrict the cover material to any one material, anything providing a good bonding surface is fine. For example, in a balsa wood board the cover could be balsa so that the box blends in with the surrounding wood. The cover enables the application of various overlays, for example, carbon fiber, fiberglass, etc. Facilitating customization of the box appearance. Allowing the boxes to blend in with the rest of the surfboard!
Side box covers feature a colored dot centered at the outboard edge. This dot is used to indicate the cant angle of the associated box. Color codes - BLUE - 0º, YELLOW - 2º, RED - 4º, BLACK - 6º, and PURPLE - 8º. The cant angle is also marked in the slot, as well as on the bottom outside of the box. Making it easier to identify the cant angle.
The outer flange of the collar provides an aesthetic detail by forming a thin pin line around the perimeter of the cover.
Adjustment of 5mm (3/16") forward and backwards provided by the fin slot. Allows fin placement to be fine tuned. Designed to be compatible with all dual tab fins on the market. Each box ships with a card containing 3 pieces of die cut masking tape. These are used to cover the slot and screws during installation. Side boxes ship on trays containing 10 boxes, die cut masking tape, and 2 hex keys. Center boxes ship in packs containing 5 boxes.
A unique patent pending characteristic of the GEARBOX 2 design, is the load beam collar. Location of the cup shaped beam is below the upper surface of the box. A high density material placed within the load beam, increases the bonding area for the bottom laminate. This is called a cover.
Selection of cover material is based on good resin adhesion characteristics. Installation bonds the entire cover into the collar. Turning the load beam collar into a strong structural entity that is efficient at load dissipation. The design of the collar results in a cover that has the greatest amount of exposed surface area possible. Allowing for a superior bond with the bottom laminate of the board.
A dam is a requirement for an under the glass system. It serves to provide a ramp over which the bottom laminate can be draped, allowing the dam to be exposed when the board is sanded. It also allows the grub screws to be protected during the laminating process.
Die cut masking tape is provided that fits the top of the dam to cover the slot and screws during lamination. The dam has high enough clearance above the bottom lamination to allow it to be sanded down to expose the slot and screws.
The fin slot provides the housing for the base of the fin, and is designed to provide a snug fit for the base. The GEARBOX slot also provides an 5mm (3/16”) of adjustment for the fin, allowing the fin position to be tweaked!
The slot supports both GEARBOX and DUAL TAB bases.
GEARBOX features a bridge at the center of the fin slot, on the bottom. This bridge serves to tie the two sides of the slot together for additional strength. Tying the sides together in this manner means the slot is less likely to spread apart under the loads applied to the base of the fin.
GEARBOX fin bases have a corresponding semi-circular notched cutout to fit over the bridge. Dual tab bases fit either side of the bridge.
GEARBOX utilizes two grub screws to lock the fin into the slot. The screws are tightened down into a notch in the fin base that pushes the fin down, locking it into the slot.
For side boxes the two screws are placed on the stringer side of the box. While the the center box the screws are on opposing sides of the box.
The GEARBOX fin bases is a full length base in order to provide the strongest support in the slot. This minimizes the amount of flex in the base of the fin allowing it to flex as designed.
The base features vee notches onto which the grub screws land allowing for a compression fit into the box. These notches are designed to support adjustment of the fin position within the slot. The notch also minimizes the risk of the fin falling out of the box should the screws loosen.
A unique aspect of the GEARBOX system is the load beam collar and it’s associated cover. The load beam cover is a separate part from the box itself making it easier to optimize for bonding and appearance.
The cover provides the greatest possible bonding surface for the bottom laminate. Allowing for a stronger installation. The cover extends down through the trussing of the load beam, providing a better bond to the underlying foam shelf. Sandwiches the web of the load beam, locking it in place!
Hex covers are a new addition to the GEARBOX system, initially they can optionally be selected in place of the standard covers. A hexagonal scoring pattern has been added to the upper surface of the cover. In addition, to the normal excellent bonding properties of the cover material, the scoring adds an improved mechanical bond! Hex covers will become the standard cover over the coming months.
The load beam cover provides the greatest possible bonding surface for the bottom laminate. Allowing for a stronger installation. The cover extends down through the trussing of the load beam, providing a better bond to the underlying foam shelf. Sandwiches the web of the load beam, locking it in place!
Because the cover is a separate part, from the box, its material can be optimized to provide the best possible bonding characteristics. All covers come pre-installed in a box, with a sanded upper surface! Loose covers can be purchased for customization purposes.
Besides the structural role that the cover plays within the load beam, it also has an aesthetic aspect. The large surface area, can be covered in different overlays to enhance the appearance of the installed box. Customization options are available for the cover. For example, the use of balsa veneer in a balsa wood board would compliment the appearance. This decorative covering is applied to the upper surface of the cover, can provide a wide range of other design options. These coverings can range from carbon fiber to wood veneers, or printed fabrics.
Installation strength is further improved through the extensive trussing in the load beam web. The cover extends through these truss openings, creating a bond between the cover and the surfboard foam.
Cover material selection is driven by bonding properties of the material to surfboard resin systems. Examples include high density foams, carbon fiber, wood veneer, fiberglass, or other structural materials. Provides greater creative flexibility with the box installation.
The standard covers feature a small colored dot at the outside edge, opposite the screws. This dot is used to provide an indication of the cant angle of the box. Because of its location it is visible after the box has been installed making cant identification easier when there are fins installed in the board. The dots are color coded to the different cant angles available. The center covers have no indicator!
Optional color covers are available in seven different colors - BLACK, GRAY, YELLOW, MANGO, RED, BLUE, GREEN,and PURPLE! All these colors are also available for the center covers.
All color covers are HEX covers only! All of these colors are made from Expanded ABS.
NOTE: colors shown might not exactly match the finished product!
To simplify cant identification on finished surfboards, the cover features a color dot on the outboard edge. This serves as a permanent indicator that is visible when there is a fin installed.
The cant angle colors are - BLUE = 0º, YELLOW = 2º, RED = 4º, BLACK = 6º, and PURPLE = 8º. Cant indicators are not present on color or custom covers.
One of the unique aspects of the GEARBOX system is the use of a cover in the load beam collar. Not only does this cover facilitate better bonding with the laminating system, it also provides a unique customization opportunity.
Covers can be optimized by overlaying the top surface with a wide variety of materials ranging from wood veneers to various exotic composite materials!
There a re two distinct types of customization that can be performed on the covers, depending on which cover is being used as the base.
There a re two distinct types of customization that can be performed on the covers, depending on which cover is being used as the base.
Plain covers are used for most of the customization options. the process involves sanding down the cover by the thickness of the overlay material that will be added to the top surface. Normally, the overlay materials are selected based on the resin absorption of bonding characteristics. The most common materials are wood veneers as these are relatively thin a easy to apply to the surface, while still providing excellent resin absorption. Customization is most commonly built on top of an existing cover in order to better control the fit into the collar. But it is possible to completely replace the cover with one made of a different material. We provide a simple guide to cover customization here.
Hex covers can be customized by filling the grooves in the covers with different color resin, allowing the hex pattern to be accentuated. This is easily performed with a syringe, then once the resin has cured the covers top surface is sanded down. A guide is close to being ready that will provided instructions on how to perform the customization and will be found here.
GEARBOX 2 has a complete routing system that supports different installation options. The alternate installation options are a convenience for builders working in different materials. The system is made up of three nesting jigs, router bit, hex key, and install instructions.
The primary installation method is a two-step process. It creates a cavity with a shelf onto which the box’s load beam collar rests. The lower part of the cavity houses the bottom of the box. To ease the routing of these cavities the routing system includes jigs that simplify the routing process. These jigs allow the routing to take place without the need to adjust the depth of the router bit.
The system consists of three jigs - base, bottom, and top. The base jig is the primary positioning jig that locates the other jigs. The bottom jig routs the center cavity for the bottom of the box. It nests within the base jig when in use. Finally, the top jig routs the shelf onto which the box rests. This jig sits on top of the base jig and has overhanging ends that position it on the base jig. It is the thickness of this jig that sets the correct depth of the router bit.
In addition to the complete routing system the jigs can be purchased as a set or individually making it simple to replace any part of the system when needed.
All jigs are made from glass filled polycarbonate so they are strong, durable, and relatively inexpensive.
Base jig is the foundation of the routing system. Ensures correct placement of the routing system. Soft rubber pad on the bottom prevents damage and minimizes movement of the jig. Features a number of markings on the upper surface to assist in the correct placement on a board. Made from glass filled polycarbonate, making them inexpensive and durable.
The base jig is the primary jig, locates the system on the surfboard, and it isn't removed until the routing process is complete. Designed to make the process of locating the system on the surfboard as simple as possible. Small windows extend through each end of the jig that make it easier to position the jig on the shapers mark. Used in conjunction with a pair of centerlines extending the length of the jig, and down inside the central cutout in the jig. There are two centerlines. One that represents the actual center of the box and runs down the center of the jig. Used when installing a center box. The side box centerline positions the side boxes, this centerline represents the inner face of the fin slot.
Marks on the jig help alignment when installing side boxes. An arrow and the word "Rail" indicates the positioning of the jig, relative to the rail of the surfboard. There are two shapers mark windows, so that they work for both sides of the board. The back window on the jig is always used to position the jig on the shapers mark. The base jig has a soft rubber pad on the bottom to protect the surfboard, and also to prevent the jig from moving. The bottom of the base jig is also shaped to make it easier to place in deep double concaves, and for easier handling. Accomplished with a 45º chamfer around the bottom edge of the jig. Made from glass filled polycarbonate.
Placed within the inner cutout of the base jig, the bottom jig to routs the cavity for the bottom of the box. No positioning required, drop it into the base jig and then rout the cavity. For this operation the router bit is set to the deepest depth.
Like the base jig, this jig has a rail side indicator to help orient the jig. Made from glass filled polycarbonate.
This jig is used to rout the shelf onto which the box rests. After routing the bottom cavity, the bottom jig is removed and the top jig is placed on top of the base jig. The jig is self positioning on top of the base jig with locators that lock the jig in place.
The jig automatically adjusts the router bit depth. Like the base jig, this jig has a rail side indicator to help position the jig. Made from glass filled polycarbonate.
Utilizes a router bit with an upper bearing. This bearing runs against the inner surface of the routing jigs, generating the correct outline.
The router bit has a 6mm (1/4") shank. 9.5mm (3/8") cutting diameter. 19mm (3/4") cutting depth. Utilizes a 13mm (1/2") diameter bearing.
A hex key is provided with the routing system. This key is used to adjust the grub screws before installation of the boxes. Features a full-size Allen wrench housed within the plastic, so it is very effective. Also used when installing fins in the system.
WARNING: do not over tighten screws as this can lead to stripping!
The routing system also comes with a printed install guide detailing the entire process. The normal guide covers the standard install process for polyurethane boards. A separate guide is provided for low density EPS installation. A lot of information on how to correctly install the system is provided, with variations for different construction techniques
All of the information available in the various install guides can also be found on this site. Along with a lot of other information about the installation process.
The image below can be used to explore the different aspects of the GEARBOX system. Hover over one of the hotspots and a brief description of the part will be displayed.
Get in touch if you have any questions about of our surfboards.